Biological Plating

1201

 

Klaue, K., et. al., "Internal Fixation with a Self-Compressing Plate and Lag Screw: Improvement of the Plate Hole and Screw Fixation. 1. Mechanical Investigation", Journal of Orthopaedic Trauma, Vol. 5, No. 3, 1991, pp. 280-288.

 

1202

 

Klaue, K., et. al., "Internal Fixation with a Self-Compressing Plate and Lag Screw: Improvements of the Plate Hole and Screw Design. 2. In Vivo Investigations", Journal of Orthopaedic Trauma, Vol. 5, No. 3, 1991, pp. 289-296.

 

3815

 

Perren, SM., et. al., "Early Temporary Porosis of Bone Induced by Internal Fixation Implants", Clinical Orthopaedics and Related Research, No. 232, July 1988, pp. 139-151.

 

7010

 

Gasser, R., and Perren, SM., "Parametric Numerical Design Optimization of Internal Fixation Plates", 7th Meeting of the European Society ofBiomechanics, July 8-11, 1990, Denmark.

 

7011

 

Klaue, K., et. al., "Interfragmentary Compression Using Inclined Lag Screws in Self-Compressing Plate Holes: Problems and Solutions" 35th Annual Orthopaedic Research Society Meeting, Feb. 1989, Las Vegas, Nevada.

 

7012

 

Gautier, E., et. al., "Porosity and Remodeling of Plated Bone After Internal Fixation: Result of Stress Shielding or Vascular Damage? " Biomaterials Damage? "Biomaterials and Biomechanics, 1983, pp.195-200.

 

7015

 

Gerber, C., et. al., "Biological Internal Fixation of Fractures"

Archives of Orthopaedic and Trauma Surgery, No. 109, 1990, pp. 295-303.

 

7016

 

Perren, S., et. al., "The Limited Contact Dynamic Compression Plate (LC-DCP)", Archives of Orthopaedic and Trauma Surgery, No. 109, 1990, pp. 304-310.

 

7017

 

Matter, P., et. al., "Clinical Experience with Titanium Implants Especially with the Limited Contact Dynamic Compression Plate System", Archives of Orthopaedic and Trauma Surgery, No. 109, 1990, pp. 311-313.

 

[Subject Index]